I did this article together after many customers requests the correct and wrong way to save their much collection of beloved signatures. Too often I saw wonderful vintage items stored or abused, which reduced it to the second sufficient garbage rate for the 99p bargain track.
It takes little effort to store it in such a way that in ten years looks as good as they do today. If you spend a good money on signatures, and you plan to send them to others, or perhaps in cash as an investment later, take the time to keep them careful, I promise you to pay you.
I will only cover the storage of signatures and sign photos in the sleeves on these pages, as the storage, storage, framework, composition and repair of these things will be covered in a separate item. The article can sometimes look a little technical, but I think that when it gives the facts, it is much less likely to use or use the wrong products.
So how does your collection currently store? Is my money on PVC sleeves and ring watchers? Or maybe just a guide of the cheap chain store, or worse an old cardboard box? Well, I’m sure you won’t be surprised to hear that all these methods humiliate your collection while we’re talking. Let’s start with those sleeves, as they will do more damage to your collection. Visit:- www.bchirartcenter.com/
The most common type of plastic sleeve is made of PVC (polyethylene vinyl chloride) or at least one very similar material, which will mean it has a plasticizer added during manufacturing. This weeklitter is the sleeve flexible, plus, more flexible (plastic), but it unfortunately means that it also has a similar effect on many of the ink used to draw the signatures stored in them, As the plasticizer acts as a kind of solvent in the ink, as well as a solvent, the paint will soften. This effect is particularly remarkable with the paint feathers and a metal markers, as the plasticizer partially or all the ink, which leads to the ink partially to join the plastic sleeve instead of his photo will absorb. The same plasticizer can, over time, also affects certain photos and images, so it can end with not just a missing signature, but also a missing or distorted image!
In addition, during the PVC manufacturing process goes by movies covered in fatty acids (to prevent the material on them). Leads on both sides of the bags (and it includes the most important chargers) that are infected, and we do not want to get fatty acids in contact with our signature.
Note. Sometimes, you can read what you can smell the cheapest sleeves, and suitable acid free sleeves do not have that smell, but it is not quite wrong, and it may also be something with the fatty acids.
How many articles should I put on each manga? The ideal is just one, but we do not live in an ideal world, so two photos back must be your maximum. If you do, make sure that between the photos put an acid and lignen divider. Why? Well, the photographic paper contains both the acid and the lignine, and these chemicals humiliate the paper by turning them yellow (therefore the old newspapers are yellow). Therefore, with them back on the back, age will age the photo paper twice as to convert their yellow signatures. Shop Only two photos per sleeve will also reduce the risk of scratching each picture on elimination. If you save several photos on each sleeve, you may have noticed how some companies are played on the back of other photos. This is again caused by chemical products within the photographs acting on the ink, and this is another reason why you only have 2 photos on a sleeve. I also do not recommend to record more than one page of album or card signed by Manga, as I saw the effects of a high sour paper in another when stored in this situation. Some ink can also transfer from one page to another, so it’s also something to consider. There are special sleeves of multiple bags for smaller album pages, etc., so don’t lose an A4 sleeve by the article. Because you can only save two photos per sleeve, you can be worth adding a distributor to help prevent damage by preventing bending and cross-contamination. If you are going to do this, make sure the reinforcements used are again free from acid; Otherwise you only take a step back. You can buy dividers free of acids and ligninos for this purpose, and it is usually available from the same suppliers as the sleeves. Look at my note on the end. The solution to the problem of the sleeve is to use sleeves made from polyester, which is stronger, optical, both more clearer, and that is more important, does not contain the plastizer fittings or fatty acids. The polyester (synthetic instead of natural) is a kind of plastic, mostly sold under the commercial name Mylar, although it will not normally find the name used. These polyester sleeves are more expensive, but in my experience they are stronger and they will be much more than the cheap plastic sleeves of staples or of course, and of course it will not harm its valuable collection. You will find much harder polyester sleeves to find, and stack staff will definitely not have a track of what you are talking about when you ask for polyester or Mylar sleeves, don’t bother! Well, you can find the safe copy sleeves, although I have never seen someone who is Polyester, and I think it is promoted as copy safe for the office market, and the copy of the essay refers only to the safe storage of photocopying -Items. Even then I can’t wait for you not to take a kind of guarantee that really doesn’t mean anything! So my advice is to avoid it.